Travel eSIM for iPad

Ostatnia aktualizacja: 2026-10-08

Short answer

Yes, you can use a travel eSIM on an iPad, as long as it is a Wi-Fi + Cellular model. Wi-Fi-only iPads have no cellular modem, so no eSIM (or SIM card) will work in them. Every current iPad with cellular supports eSIM, and since 2024 the newest iPad Pro, iPad Air, iPad mini and, from 2025, the standard iPad are eSIM-only: they have no SIM tray at all.

• Quick check: open Settings. If you see Cellular Data, your iPad can take an eSIM.
• Setup: scan the QR code from your email, add the plan, turn on Data Roaming. About two minutes.
• No contract, no ID: prepaid data, guest checkout with just an email, top-ups when you run low.
• Wi-Fi-only iPad? Put the eSIM on your phone and share it with Personal Hotspot.

See all travel eSIM plans

Which iPads support eSIM

Apple lists these iPad models as eSIM-capable. All of them are Wi-Fi + Cellular versions; the Wi-Fi-only version of the same iPad does not support eSIM.

Older cellular iPads (iPad 6th gen and earlier, iPad Air 2 and earlier, iPad mini 4 and earlier, the first iPad Pro models) take a physical SIM only, so a travel eSIM won't install on them.

If your iPad is eSIM-only, a travel eSIM is not just convenient, it is the only way to get mobile data abroad without your home carrier's roaming. You can't buy a local SIM card at the airport and pop it in.

For phones and other tablets, see our full list of eSIM compatible devices.

How to check your iPad

1. Look for Cellular Data. Open Settings. A Wi-Fi + Cellular iPad shows Cellular Data (or Mobile Data) in the left column. If it's not there, your iPad is Wi-Fi only.
2. Check the model. Go to Settings > General > About and look at Model Name to match it against the table above.
3. Make sure it isn't carrier-locked. If you bought the iPad from a mobile carrier on a contract, ask them whether it accepts other carriers' plans. iPads bought directly from Apple are not locked.

How to install a travel eSIM on iPad

1. Check Cellular Data is there. Settings should show Cellular Data. If it doesn't, skip to the Wi-Fi-only section below.
2. Buy a plan. Choose a country, regional or global plan. Guest checkout only needs an email address, and the QR code arrives by email within minutes.
3. Scan the QR code. Show the QR code on another screen (your phone or laptop), open the Camera app on the iPad, scan it and tap Cellular Plan Detected. If the email is open on the iPad itself, on iPadOS 17.4 or later you can touch and hold the QR code and tap Add eSIM.
4. Add the plan. Tap Continue, then Add Cellular Plan. Give it a label such as "Travel" if asked.
5. Turn on Data Roaming when you arrive. Go to Settings > Cellular Data, make sure Cellular Data is on and the travel plan is selected, then switch on Data Roaming. Our eSIMs connect through local partner networks, so roaming has to be on. You won't be charged roaming fees: the data comes from the plan you already paid for.

Install the eSIM at home while you're on Wi-Fi, then switch on roaming when you land. The process on iPad is almost identical to iPhone, so our step-by-step iPhone install guide is a good companion if you want screenshots. If you see "No Service" after landing, the iPhone troubleshooting guide applies to iPad too.

Got a Wi-Fi-only iPad? Use your phone's hotspot

A Wi-Fi-only iPad can't hold an eSIM, but it can share your phone's connection:

1. Install the travel eSIM on your phone.
2. On the phone, turn on Personal Hotspot (on iPhone: Settings > Personal Hotspot > Allow Others to Join).
3. On the iPad, join the phone's Wi-Fi network. If both devices use the same Apple Account, the iPhone shows up automatically under Wi-Fi as an Instant Hotspot.

This works well for browsing and maps. It drains your phone's battery faster and everything shares one data allowance, so size the plan up a bit (see below). The honest trade-off: if you use the iPad heavily every day, a cellular iPad with its own eSIM is more comfortable than tethering.

Which plan size to pick for iPad

iPads tend to use more data than phones. Bigger screen means higher-quality video, and apps often save heavier downloads for "tablet" mode. Rough guide for a trip of up to 30 days:

A couple of tips that save a lot of data:

• Download before you go. Netflix, Prime Video, Spotify and Google Maps all let you save content offline over Wi-Fi.
• Turn off iCloud backups and photo sync over cellular in Settings if you don't need them while traveling.
• Lower streaming quality in your video app's settings. HD video on a large screen can use a few GB per hour.

Every plan can be topped up if you run low, so it's fine to start smaller. Most country plans run from 1 GB to 50 GB, mostly for 30 days. For longer stays, there are 50 GB plans valid for 180 days in several countries, and multi-country trips are covered by our Europe plan (41 countries) and Global plan (120 countries). Current prices are on the plans page.

Using your iPad as a hotspot

A Wi-Fi + Cellular iPad can share its eSIM data too. Open Settings > Personal Hotspot (or Cellular Data > Personal Hotspot) and turn on Allow Others to Join. That's handy for keeping a laptop online, or for sharing one plan with a travel partner's phone. Hotspot use comes out of the same data allowance, so pick a bigger plan if you plan to do this daily.

What you get

Our travel eSIMs are data plans, which is exactly how most people use an iPad anyway:

• FaceTime, iMessage, WhatsApp, Signal and Telegram work as usual, including voice and video calls
• Maps, email, streaming, banking apps and cloud files
• 5G where available, otherwise 4G, through local partner networks
• Prepaid: pay once, no contract, no auto-renewal, top up any time

Your phone keeps its own number and SIM. The iPad eSIM doesn't come with a phone number, and classic calls and SMS aren't included.

Ready to go? Pick a plan for your trip on the plans page and get your iPad online the moment you land.